xuv835m-utility-vehicle-2024-green-deluxe (2024)

The camo cab panel enhances vehicle styling with an accent panel for the cab door (sold separately).

The green and yellow cab color panel enhances vehicle styling with an accent panel for the cab door (sold separately).

Key features

• Enhances the vehicle styling with an accent color panel for the cab door (sold separately)

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Key features

• Made from premium, heavy-duty, 600 denier-solution dyed, water-resistant, UV-stabilized polyester for mold and tear resistance
• Durable, polyvinyl chloride (PVC) rear window resists yellowing or cracking. Window opens easily with a zipper and can be secured in place with straps.
• Helps keep dust out of the operator station when installed with a full windshield

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles
• Compatible with the following cab components:

• Cab doors – both poly and canvas
• Poly roof
• Full poly windshield
• Glass windshield

Key features

• Made from premium, heavy-duty, 600 denier-solution dyed, water-resistant, UV-stabilized polyester for mold and tear resistance
• Durable, polyvinyl chloride (PVC) windows resist yellowing or cracking. Windows opens easily with a zipper and can be secured in place with straps.
• Lower PVC window for enhanced visibility

Compatibility information

• Model year 2018 and newer XUV835 and XUV865 Utility Vehicles
• Compatible with the following cab components:

• Poly roof
• Canvas roof and rear panel
• Canvas rear panel
• Cab rear panel
• Full poly windshield
• Glass windshield

Half doors are a choice on the XUV835 and XUV865 Utility Vehicles:

• One-handed operation
• Interior latch for opening
• Armrest for comfort
• Color-matched exterior decal based on the color of the unit
• Available only on open station units

The OSR doors kit is a replacement kit for the factory-installed OSR doors or can be installed on vehicles that had the OSR nets installed from the factory. These OSR half doors can only be installed on model year 2018 and newer Gator™ XUV835 and XUV865 Utility Vehicles.Model year 2019 and older vehicles also require:

• UC20514 left-hand A-post cover
• UC20515 right-hand A-post cover

The OSR color accents are sold separately and can be installed on the OSR doors.

Key features

• Enhances the vehicle styling with an accent color panel for the cab door (sold separately)
• Must order right and left side yellow decal labels to complete panel styling
• Left label: UC13523
• Right label: UC13524
• Reference CCMS solution 111866 for details on installation and alignment of color label.

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Key features

• Enhances the vehicle styling with an accent color panel for the cab door (sold separately)
• Must order right and left side yellow decal labels to complete panel styling
• Left label: UC13523
• Right label: UC13524
• Reference CCMS solution 111866 for details on installation and alignment of color label.

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

The 5-gal. (18.9-L) pail holder is ideal for operators who want to maximize the work capability of their Gator™ Utility Vehicle.The 5-gal. (18.9-L) pail holder keeps pails in place within the cargo box, ensuring that they stay safe and secure.Featuring the quick-clamp mounting system, it mounts easily to the cargo rails of the cargo box with just one clamp.

The cargo bed extender conveniently extends the rear of the cargo bed, and also acts as a cargo box divider when it is flipped inside of the cargo box. The cargo bed extender easily flips in or out with the use of quick-pull pins.

The deluxe cargo box bed mat not only protects the steel floor from scratches and dents, it also provides additional cushioning and slip resistance to items being hauled in the cargo box.

The Gator™XUV Series can be equipped with an optionaldivider for the deluxe cargo box.The dividers can be positioned at the front or rear of the cargo box bed. To change positions of the dividers, simply release the speedrail locks by hand and slide into new position, then close the locks to secure the dividers.

The cargo box side extension kit expands the versatility of the Gator™ Utility Vehicles and is ideal for those who are enhancing their property and landscape. The extensions allow operators to haul twice the volume (not to exceed cargo box weight capacity) of light material such as grass clippings and mulch.

Product features include:

• Four-sided structure that increases cargo box side height to 533 mm (21 in.) and volume to 0.74 m³ (26 cu ft)
• Mounted on the sides and front with hardware, while the tailgate can be attached or removed without tools
  • Tailgate pivots at the top (similar to a dump truck) for ease of dumping loose material
• Laser-cut, heavy-gauge, powdered-coated steel provides excellent durability
• Compatible with all model year 2011 to current Gator XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, and M-Gator A2 Utility Vehicles
• Compatible with model year 2010to currentGator TX 4X2, TH 6X4 Gas, TH 6X4 Diesel, TE, and TX Turf Utility Vehicles
• Compatible with model year 2018 and newer gas and diesel HPX Utility Vehicles.
• Compatible with Gator cabs and bedliner

NOTE: The cargo box side extensions are not intended to increase the rated cargo box carrying capacity per the vehicle specification.

A – Fender flare

B – Fender

The rear fender flare kit minimizes debris from reaching the operator station.

Product features include:

• Two pliable fender flares (one for each side)
• Hardware for mounting on the sides
• Compatible with all model year 2011 to current Gator™ XUV825, XUV825 S4, XUV855, XUV855 S4, XUV835, and XUV865 Utility Vehicles
• Compatible with model year 2010to currentGator TX 4X2, TH 6X4 Gas, TH 6X4 Diesel, TE, and TX Turf Utility Vehicles
• Compatible with model year 2018 and newer gas and diesel HPX Utility Vehicles

Overview

Rear fender flares reduce mud and debris splashing onto the vehicle and passengers. The flares are constructed from a durable molded material and integrated into the cargo box fenders. The attachment kit includes a pair of flares and mounting hardware.

Compatibility

XUV835E, XUV835M, XUV835R, XUV865E, XUV865M, XUV865R vehicles. Signature Edition vehicles include rear fender flares in base equipment.

The side tool rack enables the user to maximize the use of their cargo box by carrying long-handled tools, such as trimmers, shovels, and rakes, on the outside of the box.The holders are adjustable, allowing the users to carry a wide array of items in the racks.

Easily mount a spare tire to the side of the cargo box with this convenient kit.

Recommended to carry spare front tire, as the front tire can be mounted on either the front or rear hubs.

Each kit (available through Order Zone) contains one bench base cover, one backrest cover, and installation instructions.

NOTE: One carton (two kits) outfits driver and passenger seats.

Special features:

• Exceptional abrasion, tear, and puncture resistance
• Constructed with military-grade CORDURA® fabrics
• Protects original equipment manufacturer (OEM) seats from mud, snow, and debris
• Quick and easy installation
• Available in black or Realtree Hardwoods HD® pattern
• Military-grade zippers
• Limited 1-year warranty
• Made in the USA

Realtree HardwoodsHD is a trademark of Jordan Outdoor Enterprises, Ltd. CORDURA is a trademark of INVISTA North America, LLC.

Each kit (available through Order Zone) contains one bench base cover, one backrest cover, and installation instructions.

NOTE: One carton (two kits) outfits driver and passenger seats.

Special features:

• Exceptional abrasion, tear, and puncture resistance
• Constructed with military-grade CORDURA® fabrics
• Protects original equipment manufacturer (OEM) seats from mud, snow, and debris
• Quick and easy installation
• Available in black or Realtree Hardwoods HD® pattern
• Military-grade zippers
• Limited 1-year warranty
• Made in the USA

Realtree HardwoodsHD is a trademark of Jordan Outdoor Enterprises, Ltd. CORDURA is a trademark of INVISTA North America, LLC.

Each kit (available through Order Zone) contains one bench base cover, one backrest cover, and installation instructions.

NOTE: One carton (two kits) outfits driver and passenger seats.

Special features:

• Exceptional abrasion, tear, and puncture resistance
• Constructed with military-grade CORDURA® fabrics
• Protects original equipment manufacturer (OEM) seats from mud, snow, and debris
• Quick and easy installation
• Available in black or Realtree Hardwoods HD® pattern
• Military-grade zippers
• Limited 1-year warranty
• Made in the USA

Realtree HardwoodsHD is a trademark of Jordan Outdoor Enterprises, Ltd. CORDURA is a trademark of INVISTA North America, LLC.

Key features

• All-season protection against sun damage, rain, dust, and tree sap
• Reinforced corners for added durability
• Fabric coated for maximum water resistance and repellency
• Elastic shock cord in bottom hem for a quick, custom fit

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Ordering information

Available through Order Zone

Key features

• Provides a modern and aggressive appearance
• Heavy-duty, 44.45-mm (1.75-in.) diameter, steel tube construction
• Welded steel brush guard provides protection for the front grille, lights, and hood
• Easy-to-use quick pull pins allow the brush guard to be hinged forward to gain access under the hood
• Includes mounts for auxiliary light-emitting diode (LED) lights (sold separately)

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Key features

• Enhances the aggressive appearance of the vehicle
• Easily attaches to the brush guard (required – sold separately)
• Provides additional protection to the side hood and fender area without adding additional overall width to the vehicle
• Still allows full entry under the hood when brush guard is hinged forward

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Key features

• Kit contains both front and rear CV guards
• Additional added protection for the A-arms and CV joints
• High-strength, formed steel guards handle impacts while maintaining a low, unsprung mass to provide exceptional ride quality
• Easily bolts to the A-arms
• Drainage holes on the bottom of the guards prevent buildup of dirt, grass, and other loose materials

Compatibility

• Model year 2020 and newer XUV835 and XUV865 Utility Vehicles

Key features

• Easily attaches to the brush guard (required – sold separately)
• Provides protection to the front fender area
  • NOTE: With fender guards installed, the overall width of the vehicle increases to 1.75 m (69 in.).

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

The rear bumper offers stylish, heavy-duty rear protection to the vehicle.

Compatible with:

• Model year 2011 and laterGator™ XUV 625i, XUV 825, and XUV 855 Utility Vehicles
• Model year 2010 and laterGator TX, TX Turf, TH 6X4 Gas, TH 6X4 Diesel, and TE Utility Vehicles
• Model year 2018 and later Gator XUV835 and XUV865 Utility Vehicles

CV guards add additional protection for the A-arms, brake lines, and CV half shafts:

• Formed steel guards handle impacts while maintaining a low unsprung mass
• Easily bolt to the A-arms with six bolts
• Drainage holes provided to prevent buildup of dirt, grass, and other loose materials
• Compatible with all model year 2011 to current Gator™XUV625i, XUV825, XUV855, and M-Gator A2 Utility Vehicles
• Compatible with model year 2013 to current Gator XUV825 S4 and XUV855 S4Utility Vehicles
• Compatible with model year 2018 to current Gator XUV835 and XUV865 Utility Vehicles

Key features

• Provides additional protection to the operator and passengers
  • NOTE: Never carry loads in the cargo box over the load guard.
• Perforated, black metal screen easily attaches to the occupant protective structure (OPS)

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles
• Not compatible with cab rear panel

Key features

• Provides protection to the cab rear-panel glass
  • NOTE: Never carry loads in the cargo box over the load guard.
• Perforated, black metal screen easily attaches to the cab rear panel (required – sold separately)

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

The brake and taillight protector offers increased protection to the taillight assembly from incidental contact.

The front attachment harness includes connections for the following kits:

• Light-emitting diode (LED) headlights
• Turn signals
• Horn
• Brush-guard-mounted auxiliary lights

Key features

• The front attachment harness (dash port) includes connections for the following kits:

• Rear sprayer
• Rear spreader
• Blades
• GreenStar™ Display as part of the Ag Management Solutions (AMS) integration kit

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Key features

• The front cab attachment harness includes connections for the following kits:

• Front auxiliary lights
• Windshield wiper

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Key features:

• The hydraulic blade and winch harness includes connections for the following kits:

• Hydraulic blade
• Winch

Compatibility:

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Key features

• The rear cab attachment harness includes connections for the following kits:

• Rear auxiliary lights
• Beacon light
• Ag Management Solutions (AMS) receiver harness

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Key features

• The roof attachment harness includes connections for the following kits:

• Front cab attachment harness
• Rear cab attachment harness
• Upper speakers for premium stereo kit

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Key features

• 76-mm (3-in.) round, light-emitting diode (LED) strobe light provides excellent visibility for vehicle bystanders
• Especially useful for working around properties and job sites
• Acrylic amber lens resists scratching and scuffing
• Impact-resistant nylon housing
• Society of Automotive Engineers (SAE) J845 (Class 3)-compliant
• UL® recognized
• Flash rate: 60 +/- 10 fpm
• Stands 21.3-cm (8.4-in.) tall from roof/occupant protective structure (OPS)
• Folds down out the way when not in use

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Electrical harness requirements

UL is a trademark of UL LLC.

Key features

• Upgrade from halogen headlights
• High/low beam
• Raw lumen output (per light): 1,075 (high beam), 430 (low beam)
• Effective lumen output (per light): 720 (high beam), 240 (low beam)
• Nominal LED color temperature: 5000 K
• Current draw: 1.14 amps (high beam), 0.41 amps (low beam)

Compatibility

• Model year 2018 and newer XUV835 and XUV865 Utility Vehicles
• Model year 2021 and newer XUV560E, XUV560E S4, XUV590E, XUV590E S4, XUV590M, and XUV590M S4 Utility Vehicles

Electrical harness requirements

Key features

• The LED driving lights can be mounted on the front occupant protective structure (OPS), front cab, rear OPS, rear cab, or brush guard
• Beam pattern: driving (focused, intense beam of light good for illuminating a stretch of road directly in front of the vehicle)

• Lamp sealing: IP69K
• Light output (per light): 1150 lumens
• LED color temperature: 5000 K
• Amp draw (per light): 1.4 amps
• 6 LEDs per light
• Aluminum housing

Compatibility

• Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
• Model year 2018 to current XUV835 and XUV865 Utility Vehicles
• Model year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
• HPX Utility Vehicles

Key features

• The LED work lights can be mounted on the front occupant protective structure (OPS), front cab, rear OPS, rear cab, or brush guard
• Beam pattern: flood (spread of light over a wider, shorter distance)

• Lamp sealing: IP69K
• Light output (per light): 1200 lumens
• LED color temperature: 5000 K
• Amp draw (per light): 1.4 amps
• 6 LEDs per light
• Aluminum housing

Compatibility

• Model Year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
• Model Year 2018 to current XUV835 and XUV865 Utility Vehicles
• Model Year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
• HPX Utility Vehicles

Key features

• Convex mirror reflects a wide-angle image to help the operator see behind the vehicle
• Connected to ball stud for easy adjustment

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Key features

• Kit allows mirrors to be installed on either an open-station or cab vehicle
• Mirrors can be easily adjusted based on operator preference

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Key features

• Allows the cell phone and tablet mount to be installed in the upper dash location
• Required for cell phone mount if mounted in the lower dash location

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Cell phones, global positioning system (GPS), and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator station.

For proper machine operation, it is critical that accessory devices and tools be located and mounted where they are accessible but do not interfere with visibility and controls. The new RAM® mount kit has been specially developed to meet this need in John Deere tractors and now utility vehicles.

Simply remove the large wing nut from the assembly,insert the stud into any open hole in the occupant protective structure (OPS), and tighten down the jam nut.

Key benefits:

• Patented RAM X-Grip™ holder fits most cell phones and similar devices including iPod®, iPad®, iPhone®, BlackBerry®, Samsung Galaxy® and others.
• Mounts to the holes in the OPS
• Ball joints allow for variable positioning
• Holds firm even in rugged terrain
• The holder is compatible with many other RAM® products with their B size or 25.4-mm (1-in.) ball accessories

The RAM X-Grip has a clean and clever four-leg design that sports great holding power without hidingthe phone behind foam pads and plastic.

Features:

• Rustproof
• High-strength composite and stainless-steel construction
• Spring-loaded holder expands and contracts for custom fit
  • Minimum width: 1.875 in. (47 mm)
  • Maximum width: 3.25 in. (82 mm)
  • Depth:0.875 in. (22 mm)
• Rubber-coated tips will hold device firm and stable
• Easy access grip knobs for quick release of your device

Warranty:

90 days, limited.

RAM and RAM X-Grip are trademarks of National Products Inc. iPad, iPod, and iPhone are trademarks of Apple, Inc. BlackBerry is a trademark of Research In Motion Limited (RIM).Samsung Galaxy is a trademark of Samsung Electronics Co.

Key features

• Shades occupants from the glare of sunlight
• Hinged design
• Tan color
• Kit includes left and right visor. Rearview mirror kit required for installation.

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Key features

• Keeps tablet at the operator’s fingertips for doing jobs such as soil sampling
• Utilizes a RAM® mount to easily move tablet to desired location

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

RAM is a trademark of National Products, Inc.

Key features

• Enhances the appearance of the operator station with a molded, soft-touch, automotive-style roof headliner
• Made from 3.175-mm (1/8-in.) thick sound-dampening material for improved occupant comfort
• Easily attaches to the roof with cap screws and push darts

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Overview

Bench seat covers are available for full-size Gator™ utility vehicles.

Benefits

• Protection for the bench seat from wear and stains
• Constructed with military-grade CORDURA® fabrics
• Quick and easy installation
• MOLLE attachment locations (MOLLE attachments available through Order Zone)
• Easy access to seatbelts
• Available in three color options: black, Realtree EDGE® camo, or coyote brown

Additional details

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Ordering information

Available through Order Zone.

CORDURA is a trademark of INVISTA North America, LLC. Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.

Overview

Bench seat covers are available for full-size Gator™ utility vehicles.

Benefits

• Protection for the bench seat from wear and stains
• Constructed with military-grade CORDURA® fabrics
• Quick and easy installation
• MOLLE attachment locations (MOLLE attachments available through Order Zone)
• Easy access to seatbelts
• Available in three color options: black, Realtree EDGE® camo, or coyote brown

Additional details

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Ordering information

Available through Order Zone.

CORDURA is a trademark of INVISTA North America, LLC. Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.

Key features

• Protection for the bench seat from wear and stains
• Elastic-hem cord closure for easy adjustment
• Easy access to seatbelts

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Ordering information

Available through Order Zone

Overview

Bench seat covers are available for full-size Gator™ utility vehicles.

Benefits

• Protection for the bench seat from wear and stains
• Constructed with military-grade CORDURA® fabrics
• Quick and easy installation
• MOLLE attachment locations (MOLLE attachments available through Order Zone)
• Easy access to seatbelts
• Available in three color options: black, Realtree EDGE® camo, or coyote brown

Additional details

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Ordering information

Available through Order Zone.

CORDURA is a trademark of INVISTA North America, LLC. Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.

Kit includes two comfort straps for the left and right seat belts.

• Provides relief to the operator'sand passenger's upper body when driving over rough terrain by allowing the seat belt to stretch when the seat belt locks
• Moves the upper mounting point of the seat belt down 6 in. (152 mm)
• Can be mounted to both the driver- and passenger-side upper mounting point of the three-point seat belt
• Compatible with all model year 2017 - current Gator™ HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, XUV560, XUV560 S4, XUV590i, XUV590i S4, and RSX860i Utility Vehicles when equipped with standard Occupant Protective Structure (OPS)
• Compatible only with standard Occupant Protective Structure (OPS), for deluxe cab frame, order BM22703

The 45-gal. (170-L) Gator bed sprayer is designed to work with the Gator vehicles equipped with the steel bed or deluxe cargo box. It provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and de-icer. It comes complete with a 43-in. boom that sprays a 120-in. swath. It's equipped with a 20-ft hose and a spray wand for spot spraying lawns, shrubs, trees, etc. The fully adjustable brass spray wand tip achieves streams up to 30 ft. It comes equipped with rubber feet and custom brackets, which secure to theGator bed, for ano toolsmount.

Specialfeatures:

• 45-gal. (170-L) capacity
• Brackets secure to Gator bed, no tools or additional strapping required after initial set-up
• Brackets allow boom height adjustment
• 100 psi SHURflo diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage
• The fully adjustable brass spray wand tip achieves streams up to 30 ft
• Equipped with a 20-ft hand wand hose with side mount hose tender for convenience
• Check valves in boom tips prevent siphoning and dripping, which can cause lawn spotting
• On/off switch located near operator
• Easy boom removal for added convenience
• Control valve channels spray to either the boom or spray wand
• 12-V plug included with wiring harness, complete with quick-disconnects, for convenient electrical hookup
• Rugged translucent yellow tank with molded fill level indicators (in gallons)

Specifications

Ordering information

Contact the local John Deere dealer for availability and pricing information.

45-gal. (170-L) Gator bed sprayer
Order number: LP20852

SHURflo is a U.S.-registered trademark of Sta-Rite Industries, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.

High-performance features:

• 45 psi, 3.6gpm SHURflo®diaphragm-type pump is designed for high hour applications and can be run dry without damage
• Premium pistol grip spray gun, designed for single hand mist to 35-ft stream
• Equipped with a 20-ft hand wand hose with side mount hose tender for convenience
• Glycerin-filled pressure gauge and TeeJet™pressure regulation/recirculation valve
• Choice of booms (sold separately)
• On/off capabilities in the palm of your hand with the included sprayer remote control (LP22912)
• 12V plug included with wiring harness, complete with quick-disconnects, for convenient electrical hookup
• Brackets secure to Gator bed, no tools or additional strapping required after initial set-up
• Control valve channels spray to either the boom or spray wand
• Rugged translucent yellow tank with molded fill level indicators (in gallons)

Specifications

Ordering information

Contact the local John Deere dealer for availability and pricing information.

High-performance 45-gal. (170-L) Gator bed sprayer
Order number: LP22908

SHURflo is a U.S.-registered trademark of Sta-Rite Industries, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.

The high-performance (HP) single-tank 340.7-L (90-gal.) Gator bed sprayer is designed to work with Gator vehicles equipped with the deluxe cargo box that have a capacity in excess of 362.9 kg (800 lb). The custom molded 340.7-L (90-gal.) tank provides a low profile with capacity perfect for athletic fields, farmettes, commercial maintenance, or any large property. It provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and de-icer. Custom engineered mounting hardware ensures the unit stays secure without the use of additional straps or tie-downs. Cover ground quickly with flexible boom options. (Boom sold separately).

High-performance features:

• 100 psi, 4-GPM diaphragm-type pump is designed for high-hour applications and can be run dry without damage
• Premium pistol grip spray gun, designed for single-hand mist to 10.7-m (35-ft) stream.
• Side-mount hose tender for easy hose access and storage
• Glycerin-filled pressure gauge
• TeeJet™ pressure regulation/recirculation valve for precise sprayer calibration

Additional features:

• Custom engineered brackets secure to Gator bed with no tools or additional straps
• Control valve channels spray to either the boom or spray wand
• Includes Gator accessory wiring harness, complete with quick disconnects, for convenient electrical hookup
• Rugged translucent yellow tank with molded fill level indicators (in gallons)

Overview

The 341-L (90-gal.) rate controlled sprayer for Gator™ utility vehicles is proof that the evolution of modern sprayers is correlated to progress in electronics and forward thinking. By utilizing pulse width modulation (PWM) technology, like the systems found on large-scale ag sprayers, this sprayer provides many of the same features and benefits to operators with XUV835 and XUV865 Full-Size Crossover Utility Vehicles.

Benefits

• Greater productivity due to faster travel while spraying
• Easier adjustments through advanced controls using the 8.1-cm (3.2-in.) display
• Savings on chemical costs thanks to more consistent application rate
• Lower risk of environmental contamination because of precision spray rate

Additional details

• Rate control technology– allows operators to effortlessly hold their application rate without worrying about maintaining exact ground speed.
• 8.1-cm (3.2-in.)display –provides operators with the ability to select a spray mode (boom or wand), adjustments to the speed range, tip size, and flow rate, and individually activate or deactivate tips for greater application options.
• Pressure control through return valve– helps maintain the droplet size defined by the spray tip, which is important as some materials require different droplet sizes.
• Individual tip shutoff– provides greater options for different spraying applications.
• Shurflo 20-L/min (5.3-gpm) pump– is designed for high-hour commercial applications and provides up to 4.1 bar (60 psi) on demand.
• Spring-loaded, folding steel boom –applies up to 3.8-m (12.5-ft) spray swath. Five XRC TeeJet® nozzles are used to prevent dripping that can lead to spotting.
• Adjustable hand wand– features a brass tip with a spray pattern that can be adjusted from cone to stream, perfect for spraying trees, weeds, and hard-to-reach places.

Compatibility

• Model year 2018 and newer Gator XUV835E, XUV835M, XUV835R, XUV865E, XUV865M, and XUV865R Full-Size Crossover Utility Vehicles

Specifications

Components included

• 341-L (90-gal.) sprayer assembly
• 3.8-m (12.5-ft) boom and support components
• 9.1-m (30-ft) deluxe hand wand
• Controller and mounting plate
• 8.1-cm (3.2-in.) display
• Display mounting bracket
• Dash, chassis, and sprayer harnesses
• Hardware
• Operator's manual

Required John Deere parts

• E-Spec Full-Size Crossover Gator Utility Vehicles (XUV835E and XUV865E)
• Dash port attachment harness (BM26268)
• E-Spec attachment harness (BM26266)
• CAN bridge (BUC10316)
• M-Spec Full-Size Crossover Gator Utility Vehicles (XUV835M and XUV865M)
• Dash port attachment harness (BM26268)
• CAN bridge (BUC10316)
• R-Spec Full-Size Crossover Gator Utility Vehicles (XUV835R and XUV865R)
• Dash port attachment harness (BM26268)
• CAN bridge (BUC10316)
• Shurflo is a trademark of Pentair Flow Technologies, LLC. TeeJee is a trademark of Spraying Systems Co. Viton is a trademark of The Chemours Company FC, LLC.

Overview

This sprayer wiring kit provides plug-and-go functionality for customers with Full-Size Crossover Gator Utility Vehicles with deluxe cargo boxes and compatible sprayers. Instead of connecting a sprayer's wiring directly to the battery, this kit utilizes the vehicle's pre-installed wiring for a cleaner initial installation and simplified routine attachment afterwards.

Benefits

• Plug-and-go compatibility utilizing the vehicle's pre-installed wiring instead of connecting directly to the battery
• Convenient dash-mounted switch puts on/off control of a sprayer within short reach

Additional details

Included with each kit are four harnesses. Two (the upper and lower harnesses) are for the on/off rocker switch, which can be installed in one of the blank switch plates on the vehicle's dash. The chassis harness runs along the rear of the chassis, extending power and data ports to the back corner of the vehicle. Lastly, the sprayer harness connects to the chassis harness and runs to the sprayer pump, providing a clean and tidy wiring solution.

Compatibility

• Model year 2018 and newer Gator XUV835E, XUV835M, XUV835R, XUV865E, XUV865M, and XUV865R Full-Size Crossover Utility Vehicles
• Sprayers:
  • LP33597 – 94.6-L (25-gal.) sprayer for Gator utility vehicles
  • LP20852 – 170.3-L (45-gal.) sprayer for Gator utility vehicles
  • LP22908 – 170.3-L (45-gal.) deluxe sprayer for Gator utility vehicles
  • LP48006 – 341-L (90-gal.) deluxe sprayer for Gator utility vehicles
  • LP20853 – 341-L (90-gal.) dual-tank sprayer for Gator utility vehicles
  • LP22909 – 341-L (90-gal.) deluxe dual-tank sprayer for Gator utility vehicles

Components included

• Upper dash harness
• Lower dash harness
• Rocker switch (on/off)
• Rocker switch sticker
• Chassis harness
• Sprayer harness
• Hardware (includes zip ties and wire harness clips)
• Installation instructions

Required John Deere parts

• E-Spec Full-Size Gator Utility Vehicles (XUV835E and XUV865E)
• Dash port attachment harness (BM26268)
• E-Spec attachment harness (BM26266)
• M-Spec Full-Size Gator Utility Vehicles (XUV835M and XUV865M)
• Dash port attachment harness (BM26268)
• R-Spec Full-Size Gator Utility Vehicles (XUV835R and XUV865R)
• Dash port attachment harness (BM26268)

Overview

The 0.3-m³ (10-cu ft) in-bed spreader easily expands the capabilities and productivity of operators with Gator XUV835 and XUV865 Full-Size Crossover Utility Vehicles. Featuring exclusive controls and ample hopper capacity, these spreaders are the ideal spreading solution to help operators quickly apply large amounts of ice melt materials.

Additional details

The 0.3-m³ (10-cu ft) in-bed spread is compatible with model year 2018 and newer XUV835E, XUV835M, XUV835R, XUV865E, XUV865M, and XUV865R Utility Vehicles.

Benefits

• Easily control the mounted spreader with the 9-cm (3.5-in.) weatherproof, color display. Four push buttons are used to navigate functions including independent adjustment of the auger and spinner speeds, vibratory motor settings, auger reverse to clear out jammed material, and unload mode to completely empty the hopper. The display easily mounts to the vehicle's dash by utilizing existing holes.
  • If a controller area network (CAN) bridge (BUC10316) is installed on the utility vehicle, operators can access automatic stop, which halts spreader operation when the vehicle stops moving.
• Enjoy long periods of spreading ice melt materials with the ample volume of the 0.3-m³ (10-cu ft) poly hopper.
• The 7.6-cm (3-in.) diameter steel augeris powered by a direct-drive motor and features variable speed control, automatic jam clearing, and reverse to clear jammed material.
• Quickly cover large areas up to 9.1-m (30-ft) wide using the 30.5-cm (12-in.) diameter steel spinner withindependent speed control.
  • This entire assembly can be quickly disconnected to access the vehicle's hitch and reduce the spreader's overall footprint for storage.
• Eliminate bridged material inside the hopper with the vibratory motorthat features four modes (pulse, low, high, and ramp).
• A top screen and fitted tarpare included to help with material handling. The top screen prevents clumped material from entering the hopper, while the fitted tarp helps keep material dry.
• Get a dedicated, secure fit to the cargo box from the provided mounting hardware. Two stainless-steel tie-down rods secure the spreader to the tie-down hooks in the bed.

• 0.5-m ³(17-cu ft) capacity

• 453.6-kg (1000-lb) load limit

• Copolymer polypropylene is compression molded for optimum thickness in all areas and maximum durability

• Heavy-duty, reinforced structural frame with a25.4-mm (1-in.) diameter, one-piece axle to handle weight, speed, and bumps

• Spring-loaded dump latch for easy dumping and positive lock to prevent accidental unlocking when being towed

• Double-sealed, high-speed roller bearings to handle a 48-km/h (30-mph) maximum speed

• Heavy-duty polyethylene bed

  • Accepts dividers to separate cargo (template included)

• All-terrain knobby tires

  • Provides good flotation and traction in mud, sand, and other wet or soft areas

  • Flexes over bumps and ruts for a smoother, more controlled ride

  • Minimizes ground compaction to save turf and prevent ruts in soft ground

• Poly fenders to keep the operator, cart, and vehicle clean

• Suitable for use with most JohnDeere utility vehicles equipped with a 48-mm (1.875-in.) ball hitch, including Gator™ Utility Vehicle models TX, TX Turf, TH 6x4, TH 6x4 Diesel, all HPX 4x4 models, and all XUV models

• Quality and styling compatible with other JohnDeere equipment

Ordering information

Contact your local John Deere dealer for availability and pricing information.

17AT Cart

Order number: LPPCT17ATJD

Overview

Whether it's a snow removal contractor, a grounds crew at a college campus, or a municipality working downtown, a drop spreader is a professional's choice for precision spreading. This drop spreader combines a large, 0.14-m³ (5-cu ft) material capacity with a precise 109-cm (43-in.) spread width that's ideal for salting sidewalks. Heavy-gauge stainless-steel construction, simple drives, and an industry-exclusive removable rotor tray make this attachment the ultimate spreading solution.

Benefits

• Enjoy long periods of spreading with the stainless-steel hopperthat offers 0.14-m³ (5-cu ft) of material capacity.
• The stainless-steel rotoris segmented to enhance the accuracy of material distribution with the 109-cm (43-in.) spread width.
• Simple, enclosed driveshelp enhance the spreader's longevity.
• Get perfect, tool-free selection of material flow with a six-position gate.
• Experience an easy, tool-free cleanout from the industry-exclusive removable rotary tray.
• Eliminate material bridging with the vibration motor.
• Enhance productivity with the multipurpose use of the spreader.Use it in the winter to spread ice-melt material and in the summer to apply fertilizer, topsoil, and lime.

Additional details

Specifications:

• Hopper capacity: 159 kg (350 lb), varies by material
• Rotor speed: 1.3 to 6 rpm
• Electrical: 12 V

Overview

The 0.085-m³ (3-cu ft) fertilizer spreader for Gator XUV835 and XUV865 Full-Size Crossover Utility Vehicles is ideal for applying fertilizer, seed, herbicide, and other fine-particle materials. This spreader features a poly hopper with up to 109 kg (240 lb) of material capacity to minimize refilling. After pairing with a Gator hitch and display (LP69908), spread-width adjustments can be made up to 6.1 m (20 ft).

Benefits

• Enjoy long periods of spreading with a poly hopper thatoffers 109 kg (240 lb) of material capacity.
• Get long-term durability from the stainless-steel, 25.4-cm (10-in.) diameter spinner.
• Control the flow of fine materials through the adjustable gateoperated with an electric actuator.
• Control the spread pattern with the side deflector.
• Satisfy heavy-duty spreading demands using the 1/4-kW (1/3-hp), semi-sealed electric motor.
• Improve durability in rugged conditions with a powder-coated steel frame.

Additional details

Overview

The 0.085-m³ (3-cu ft) salt spreader for Gator XUV835 and XUV865 Full-Size Crossover Utility Vehicles is the convenient spreading solution for applying rock salt in winter weather. This spreader features a poly hopper with up to 109 kg (240 lb) of material-carrying capacity. After pairing with a Gator hitch and display (LP69908), spread-width adjustments can be made up to 7.6 m (25 ft) wide.

Benefits

• Enjoy long periods of spreading with the poly hopperthat offers 109 kg (240 lb) of material capacity.
• Easily move large-particle material, like rock salt, to the spinner with the vertical auger.
  • NOTE: The spreader is not well suited to handle fine-particle materials like calcium chloride.
• The 25.4-cm (10-in.) diameter, nylon, glass-reinforced spinner withstands corrosive ice melt products for long-term use.
• Satisfy heavy-duty spreading demands with the 1/4-kW (1/3-hp), semi-sealed electric motor.
• Improve durability in rugged conditions with a powder-coated steel frame.

Additional details

Overview

Benefits

• Easily control the mounted spreader with the 9-cm (3.5-in.) weatherproof color display. Four push buttons are used to navigate functions including independent adjustment of the auger and spinner speeds and activating the vibratory motor on 0.14-m³ (5-cu ft) drop spreaders. The display mounts easily to the vehicle's dash by utilizing existing holes.
  • If a controller area network (CAN) bridge (BUC10316) is installed on the Gator, operators will also have access to automatic stop functionality, where spreader operation halts when the vehicle stops.
• Designed specifically for Gator utility vehicles, the hitchensures safe and secure spreader fitment.
• The powder-coated steel hitchprovides the utmost support and durability.

Additional details

The hitch and display are compatible with the following models:

• Model year 2018 and newer XUV835E, XUV835M, XUV835R, XUV865E, XUV865M, and XUV865R
• 0.085-m³ (3-cu ft) salt spreader (LP69909)
• 0.085-m³ (3-cu ft) fertilizer spreader (LP69910)
• 0.14-m³ (5-cu ft) drop spreader (LP69911)

NOTE: Available through OrderZone.

The large MOLLE storage pouch is compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.

Special features:

• Dual military-grade zippers and pulls
• Constructed with military-grade CORDURA®fabrics
• Utilizes the MOLLE attachment system
• Pair of 127-mm (5-in.) MOLLE sticks included
• Available in black, brown, or RealtreeHardwoods HD® camo pattern
• Inner liner made of high-density coated pack-cloth nylon fabric
• Built-in drain hole
• Limited 1-year warranty
• Made in the USA

CORDURA is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

• Velcro flap closure
• Padded to protect device and contents
• Constructed with military-grade Cordura™ fabrics
• Utilizes the MOLLE attachment system
• Pair of 6-in. (152.4-mm) MOLLE sticks included
• Available in black or REALTREE HARDWOODS HD™ pattern
• Inner liner made of high-density coated pack-cloth nylon fabric
• Built-in drain hole
• Limited 1-year warranty
• Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

Available through OrderZone

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

Special features:

• Velcro flap closure
• Padded to protect device and contents
• Constructed with military-grade Cordura™ fabrics
• Utilizes the MOLLE attachment system
• Pair of 6-in. (152.4-mm) MOLLE sticks included
• Available in black or REALTREE HARDWOODS HD™ pattern
• Inner liner made of high-density coated pack-cloth nylon fabric
• Built-in drain hole
• Limited 1-year warranty
• Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

NOTE: Available through OrderZone.

The MOLLE fire extinguisher pouch is compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.

Special features:

• Military-grade rapid extraction clips
• Fits standard round 1.1-kg (2.5-lb) fire extinguishers
• Padded to protect contents
• Constructed with military-grade CORDURA®fabrics
• Utilizes the MOLLE attachment system
• Pair of 15.2-cm (6-in.) MOLLE sticks included
• Available in black, coyote brown, or Realtree Hardwoods HD® camo pattern
• Inner liner made of high-density coated pack-cloth nylon fabric
• Limited 1-year warranty
• Made in the USA

CORDURA is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.

NOTE: Available through OrderZone.

The MOLLE fire extinguisher pouch is compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.

Special features:

• Military-grade rapid extraction clips
• Fits standard round 1.1-kg (2.5-lb) fire extinguishers
• Padded to protect contents
• Constructed with military-grade CORDURA®fabrics
• Utilizes the MOLLE attachment system
• Pair of 15.2-cm (6-in.) MOLLE sticks included
• Available in black, coyote brown, or Realtree Hardwoods HD® camo pattern
• Inner liner made of high-density coated pack-cloth nylon fabric
• Limited 1-year warranty
• Made in the USA

CORDURA is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.

NOTE: Available through OrderZone.

The large MOLLE storage pouch is compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.

Special features:

• Dual military-grade zippers and pulls
• Constructed with military-grade CORDURA®fabrics
• Utilizes the MOLLE attachment system
• Pair of 127-mm (5-in.) MOLLE sticks included
• Available in black, brown, or RealtreeHardwoods HD® camo pattern
• Inner liner made of high-density coated pack-cloth nylon fabric
• Built-in drain hole
• Limited 1-year warranty
• Made in the USA

CORDURA is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.

NOTE: Available through OrderZone.

The large MOLLE storage pouch is compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.

Special features:

• Dual military-grade zippers and pulls
• Constructed with military-grade CORDURA®fabrics
• Utilizes the MOLLE attachment system
• Pair of 127-mm (5-in.) MOLLE sticks included
• Available in black, brown, or RealtreeHardwoods HD® camo pattern
• Inner liner made of high-density coated pack-cloth nylon fabric
• Built-in drain hole
• Limited 1-year warranty
• Made in the USA

CORDURA is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.

NOTE: Available through OrderZone.

The small MOLLE storage pouches are compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.

Special features:

• Military-grade zippers and pulls
• Constructed with military-grade CORDURA®fabrics
• Utilizes the MOLLE attachment system
• Pair of 127-mm (5-in.) MOLLE sticks included
• Available in black, brown, or Realtree Hardwoods HD® camo pattern
• Inner liner made of high-density coated pack-cloth nylon fabric
• Limited 1-year warranty
• Made in the USA

Cordura is a trademark of INVISTA North America, LLC.Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.

NOTE: Available through OrderZone.

The small MOLLE storage pouches are compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.

Special features:

• Military-grade zippers and pulls
• Constructed with military-grade CORDURA®fabrics
• Utilizes the MOLLE attachment system
• Pair of 127-mm (5-in.) MOLLE sticks included
• Available in black, brown, or Realtree Hardwoods HD® camo pattern
• Inner liner made of high-density coated pack-cloth nylon fabric
• Limited 1-year warranty
• Made in the USA

Cordura is a trademark of INVISTA North America, LLC.Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.

Overview

This water bottle pouch attaches to the backrest of utility vehicle seat covers that use the military-inspired modular lightweight load-carrying equipment (MOLLE) attachment system. The pouch fits up to a 0.95-L (32-oz) wide-mouth bottle.

Benefits

• Military-grade zipper and pull
• Constructed with military-grade CORDURA® fabrics
• Easily attaches with built-in straps
• Customizable with three colors: black, coyote brown, and Realtree EDGE™ camo
• Durable inner liner made of high-density coated pack cloth nylon fabric

Additional details

• Dimensions – 22.9 cm (9 in.) high, 10.2 cm (4 in.) wide, and 10.2 cm (4 in.) long
• Limited 1-year warranty
• Made in the USA

CORDURA is a trademark of INVISTA North America S.a.r.l. Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.

NOTE: Available through OrderZone.

The MOLLE fire extinguisher pouch is compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.

Special features:

• Military-grade rapid extraction clips
• Fits standard round 1.1-kg (2.5-lb) fire extinguishers
• Padded to protect contents
• Constructed with military-grade CORDURA®fabrics
• Utilizes the MOLLE attachment system
• Pair of 15.2-cm (6-in.) MOLLE sticks included
• Available in black, coyote brown, or Realtree Hardwoods HD® camo pattern
• Inner liner made of high-density coated pack-cloth nylon fabric
• Limited 1-year warranty
• Made in the USA

CORDURA is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.

Overview

This water bottle pouch attaches to the backrest of utility vehicle seat covers that use the military-inspired modular lightweight load-carrying equipment (MOLLE) attachment system. The pouch fits up to a 0.95-L (32-oz) wide-mouth bottle.

Benefits

• Military-grade zipper and pull
• Constructed with military-grade CORDURA® fabrics
• Easily attaches with built-in straps
• Customizable with three colors: black, coyote brown, and Realtree EDGE™ camo
• Durable inner liner made of high-density coated pack cloth nylon fabric

Additional details

• Dimensions – 22.9 cm (9 in.) high, 10.2 cm (4 in.) wide, and 10.2 cm (4 in.) long
• Limited 1-year warranty
• Made in the USA

CORDURA is a trademark of INVISTA North America S.a.r.l. Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.

Overview

This water bottle pouch attaches to the backrest of utility vehicle seat covers that use the military-inspired modular lightweight load-carrying equipment (MOLLE) attachment system. The pouch fits up to a 0.95-L (32-oz) wide-mouth bottle.

Benefits

• Military-grade zipper and pull
• Constructed with military-grade CORDURA® fabrics
• Easily attaches with built-in straps
• Customizable with three colors: black, coyote brown, and Realtree EDGE™ camo
• Durable inner liner made of high-density coated pack cloth nylon fabric

Additional details

• Dimensions – 22.9 cm (9 in.) high, 10.2 cm (4 in.) wide, and 10.2 cm (4 in.) long
• Limited 1-year warranty
• Made in the USA

CORDURA is a trademark of INVISTA North America S.a.r.l. Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.

Available through OrderZone

Special features:

• Extreme off-road kinetic recovery rope and storage bag
• Rope measures 9/16 in. (21 mm) X 20 ft (6.1 m) and is constructed of double-braided nylon
• 5,000-lb (2268-kg) tensile strength
• Bag is constructed with military-grade Cordura™ fabrics with built-in carry handle
• Bag utilizes the modular lightweight load-carrying equipment (MOLLE) attachment system with two 6–in. (152.7-mm) MOLLE sticks included
• Bag available in black or REALTREE HARDWOODS HD™ pattern
• Limited 1-year warranty
• Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

Available through OrderZone

Special features:

• Extreme off-road kinetic recovery rope and storage bag
• Rope measures 9/16 in. (21 mm) X 20 ft (6.1 m) and is constructed of double-braided nylon
• 5,000-lb (2268-kg) tensile strength
• Bag is constructed with military-grade Cordura™ fabrics with built-in carry handle
• Bag utilizes the modular lightweight load-carrying equipment (MOLLE) attachment system with two 6–in. (152.4-mm) MOLLE sticks included
• Bag available in black or REALTREE HARDWOODS HD™ pattern
• Limited 1-year warranty
• Made In U.S.A.

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

NOTE: Available through OrderZone.

The small MOLLE storage pouches are compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.

Special features:

• Military-grade zippers and pulls
• Constructed with military-grade CORDURA®fabrics
• Utilizes the MOLLE attachment system
• Pair of 127-mm (5-in.) MOLLE sticks included
• Available in black, brown, or Realtree Hardwoods HD® camo pattern
• Inner liner made of high-density coated pack-cloth nylon fabric
• Limited 1-year warranty
• Made in the USA

Cordura is a trademark of INVISTA North America, LLC.Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.

This tailgate kit with brake lights and taillights is specifically designed for compatibility with the top and side-door toolboxes (BM26162 and BM26160).

The tailgate can be installed in minutes once the toolbox and tail lights are installed by bolting them to the tailgate bracket.

Optional label kits are designed to fit with this tailgate:

• BM26220 – green and yellow

The tailgate is compatible with the following Gator™ utility vehicle models:

• TX
• TX Turf
• TE
• TH
• XUV625i
• XUV825i/E/M
• XUV825i/E/M S4
• XUV855D/E/M
• XUV855D/E/M S4
• XUV835E/M/R
• XUV865E/M/R
• Model Year 2018 - current HPX615 and HPX815

This custom toolbox was specifically designed for users desiring more integrated sealed storage in a cargo box.

Top door opening toolbox features:

• 125-L (33-gal.) sealed storage
• Heavy-gauge sheet metal
• D-rings for tie downs
• Fully sealed lockable latch
• Sealed door
• Toolbox divider
• Removable tool tray
• Can be mounted on either side of the cargo box

The toolbox can be installed in minutes by simply removing the cargo box sides and tailgate, and bolting the toolbox onto the cargo box.

The toolbox requires the tailgate with brake and tail lights kit BUC10393 and optional label kit:

• BM26220 – green and yellow

This toolbox is compatible with the following Gator™ Utility Vehicle models:

• TX
• TX Turf
• TE
• TH
• XUV625i
• XUV825i/E/M
• XUV825i/E/M S4
• XUV855D/E/M
• XUV855D/E/M S4
• XUV835E/M/R
• XUV865E/M/R
• Model year 2018 and newer HPX615 and HPX815

Key features

• Easily installs under the hood in models that do not have heating, ventilation, and air conditioning (HVAC) or the heater kit
• Storage tub has a volume of 21 L (5.5 gal.)
  • Rough dimensions: 88.1 cm x 20.3 cm x 38.2-cm deep (34.7 in. x 8 in. x 15-in. deep)
• Removable drain plug
• Removable tool tray
  • Dimensions: 45.5 cm x 19.3 cm x 4.6-cm deep (18 in. x 7.6 in. x 2-in. deep)

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles
  • Only compatible on these vehicles that do not have HVAC or heater kit installed

• Effectively anchors to trees/boulders

• Changethe pulling direction

• Doublethe pulling capacity

The accessories kit includes:

• Flexible treestrap

• Snatch block

• Shackle

Each kit comes in a black Cordura® heavyweight-nylon soft case.

Cordura is atrademark of INVISTA.

Key features

• Impressive pulling capacity of 2041 kg (4500-lb)
• Equipped with a water-resistant contactor that supplies the amperage required for higher pulling capacities
• Includes a 3.05-m (10-ft), water-resistant, plug-in remote for safe distance operation that plugs directly into the glove box
• 15.2 m (50 ft) of 5.6-mm (7/32-in.) synthetic rope with hawse fairlead
  • Synthetic rope does not develop sharp burrs like steel rope and does not store as much potential energy when under load
• Ergonomic clutch handle
• Limited lifetime, 3-year electrical (North America) warranty offered through WARN

Compatibility

• Model year 2018 and newer XUV835 and XUV865 Utility Vehicles
• M-spec and R-spec vehicles come from the factory winch ready, and no additional attachment harnesses are required
• Requires winch mounting kit to mount the winch either on the chassis or on the front or rear receiver
• Not compatible with winch mounts BM26252 and BM26393

Electrical harness requirements

WARN is a trademark of WARN Industries, Inc.

Key features

• Wirelessly control winch from up to 15 m (50 ft) away
• Weatherproof transmitter has two large buttons, making it easy to operate even while wearing gloves
• Colored light-emitting diode (LED) lights provide clear operator feedback
• Kit includes wireless transmitter, receiver, holster, wiring, and mounting hardware

Compatibility

• Model year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
• Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Key features

• Easily installs in minutes
• Made from two-sided, abrasion-resistant polycarbonate
• Seals against the occupant protective structure (OPS)
• A rear-panel option is recommended when a full windshield is installed to help keep dust out of the operator station

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Key features

• Designed to deflect wind, dirt, and debris over the occupants
• Easily installs in minutes
• Made from two-sided, abrasion-resistant polycarbonate

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Key features

• Tempered glass
• Heat-absorbing tinted glass absorbs solar radiation coming in through the window, reducing solar heat in the operator station
• Design allows for partial venting or a fully-open position
• One-handed operation opens the windshield with the aid of two gas struts
• Windshield-wiper ready (wiper sold separately)
• A rear panel option is recommended when a full windshield is installed to help keep dust out of the operator station

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Key features

• Wash away dirt and debris with a quick flip of a switch
• Washer bottle conveniently located behind access panel
• Washer fluid comes out of nozzle on wiper arm (windshield wiper kit required)
• Kit includes washer bottle, hose connections, and three-position switch

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Electrical harness requirements

Key features

• Clears water and debris off of the windshield for greater visibility
• Single-speed wiper
• Windshield washer ready (sold separately)
• Backlit switch installs into the dash

Compatibility

• Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Electrical harness requirements